The Work Sharp WSSAKO81113 Assorted Belt Kit review is for owners of the Ken Onion Edition sharpener who need replacement belts across a broad range of sharpening stages.
Its five-belt mix covers coarse work through extra-fine finishing, but compatibility is limited to the specified tool.
Work Sharp Belt Kit Review Summary
The quick verdict

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A useful replacement assortment for Ken Onion Edition sharpener owners who want several abrasive grades in one kit.
- Five belts are included: one each of P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
- The X65 coarse belt is described as equivalent to P220; X22 medium corresponds to P1000, and X4 fine corresponds to P3000.
- P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra-fine Micro-Mesh belt measures 1/2 by 12 inches.
Pros
- Includes five distinct grades, from coarse grinding to extra-fine finishing.
- Provides a convenient multi-grade replacement assortment for the specified sharpener.
Consider before buying
- It is not compatible with other Work Sharp tools or accessories, so buyers should confirm their exact sharpener model before ordering.
- The 6000 extra-fine belt is 1/2 inch wide, unlike the four 3/4-inch belts; check that this size suits your belt setup.
Read the full review summary
This assortment brings together five abrasive grades: P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
That range makes it a practical restock option when you use more than one belt grade and would rather replace several stages together than buy a single-grit kit.
The key buying decision is fit. The belts are designed for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO) and do not fit other Work Sharp tools or accessories.
The four coarser belts are 3/4 by 12 inches, while the 6000-grit Micro-Mesh belt is narrower at 1/2 by 12 inches.
The buying factors
Work Sharp Belt Kit Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Grit range
Five included grades span extra-coarse material removal through extra-fine finishing.
Kit versatility
The mix supports several stages of sharpening, though it is limited to one sharpener model.
Compatibility clarity
The intended Ken Onion Edition fit is identified clearly, with a direct warning against use on other Work Sharp tools.
Belt-size consistency
Four belts share a 3/4 by 12 inch size; the extra-fine belt is narrower.
Replacement convenience
One assortment replenishes five distinct grades instead of focusing on just one.
Specialization
It is useful for a multi-stage routine, but buyers who need only one frequently used grit may prefer a single-grade kit.
Key Features and Specifications of Work Sharp Belt Kit
- Five belts are included: one each of P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
- The X65 coarse belt is described as equivalent to P220; X22 medium corresponds to P1000, and X4 fine corresponds to P3000.
- P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra-fine Micro-Mesh belt measures 1/2 by 12 inches.
- Designed as a replacement abrasive belt assortment for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO).
- The engineered abrasives are made for knife and tool sharpening and grinding applications, and are manufactured in the USA by Norton Abrasives for Work Sharp.
Pros and Cons of Work Sharp Belt Kit
Pros
- Includes five distinct grades, from coarse grinding to extra-fine finishing.
- Provides a convenient multi-grade replacement assortment for the specified sharpener.
- Names grit equivalents for the X65, X22, and X4 belts to help buyers understand their place in a progression.
- The intended tool compatibility and the different size of the 6000 belt are spelled out.
Consider before buying
- It is not compatible with other Work Sharp tools or accessories, so buyers should confirm their exact sharpener model before ordering.
- The 6000 extra-fine belt is 1/2 inch wide, unlike the four 3/4-inch belts; check that this size suits your belt setup.
- The assortment supplies one belt per grade, which may not be the best fit if you routinely need several replacements of just one grit.
Who Should Buy Work Sharp Belt Kit?
Good fit
Choose this kit if you own the Ken Onion Edition WSKTS-KO and want a spread of replacement grades in one purchase.
The sequence from P120 extra coarse through 6000 extra fine can serve buyers who work through multiple sharpening or grinding stages.
It is especially sensible when your current belts are wearing at different stages or you want several options ready for future work.
The included P120, X65, X22, X4, and 6000 grades make the assortment broader than a kit centered on a single abrasive.
Before ordering, match the tool model and belt dimensions. The 6000 Micro-Mesh belt is half an inch wide, while the other four are three-quarters of an inch wide.
Who should skip it
Skip this assortment if your sharpener is not the Ken Onion Edition WSKTS-KO. The supplied compatibility guidance explicitly limits the belts to that model and says they do not fit other Work Sharp tools or accessories.
A single-grade replacement kit may suit you better if your routine depends mostly on one grit and you need several belts of that grade rather than one each across five stages.
How the Work Sharp Belt Kit Fits a Sharpening Routine
A useful spread of abrasive grades
The assortment runs from P120 extra coarse to 6000 extra fine, giving it a wider role than a fine-only or medium-only replacement pack.
The X65, X22, and X4 equivalents—P220, P1000, and P3000 respectively—offer familiar reference points when planning a progression. Buyers should still select a grade according to the task and the tool's instructions.
Check compatibility before anything else
These belts are made for the Ken Onion Edition WSKTS-KO, and the supplied compatibility information rules out other Work Sharp tools and accessories.
Since a belt kit is only useful when it fits the specific sharpener, confirm the model name on your machine before choosing this assortment.
Account for the narrower finishing belt
Four belts measure 3/4 by 12 inches, but the 6000 extra-fine Micro-Mesh belt measures 1/2 by 12 inches.
That difference is easy to overlook when expecting every belt in the kit to share one width, so check the belt path and fit guidance for your particular setup.
Buy for breadth or buy for repetition
One belt per grade makes this kit a practical way to replenish multiple parts of a sharpening sequence.
If one stage consumes belts much faster than the others, a single-grade pack may provide a more suitable replacement pattern; this assortment prioritizes range over quantity within any one grit.
Alternatives to Work Sharp Belt Kit
Sander Belts alternative

700+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81120 Fine Grit Belt Kit
Choose the assorted kit for a range of grades in one pack. Choose this fine-grit kit if X4 is the stage you use most and you want five belts of that grade.
- The WSSAKO81120 kit contains five X4 fine-grit Norton Norax 4-micron belts, listed as P3000 equivalent; each measures 3/4 by 12 inches and is intended for the Ken Onion Edition sharpener and Tool Grinding Attachment.
- The WSSAKO81113 assortment includes five grades, with one X4 fine belt among them.
Sander Belts alternative

500+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81119 Medium Grit Belt Kit
The assorted kit is the broader choice when you need multiple stages. The medium-grit kit is a better match when X22 is your regular workhorse and you want several belts in that grade.
- The WSSAKO81119 kit contains five X22 medium-grit Norton Norax 22-micron belts, listed as P1000 equivalent; the belts measure 3/4 by 12 inches and are made for the Ken Onion Edition sharpener and Tool Grinding Attachment.
- The WSSAKO81113 kit has one X22 medium belt alongside four other grades.
Is Work Sharp Belt Kit Worth It?
The Work Sharp WSSAKO81113 Assorted Belt Kit is worth considering for Ken Onion Edition owners who want to replenish several sharpening stages at once.
Its five grades offer a useful range, and the stated equivalents make three of those grades easier to place in a familiar progression.
Confirm the WSKTS-KO fit and account for the narrower 6000 belt before buying. If you need repeated replacements of one particular grade, a single-grit pack may better match your routine; otherwise, this assortment is a practical multi-grade option.
Your review at a glance

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A useful replacement assortment for Ken Onion Edition sharpener owners who want several abrasive grades in one kit.
- Five belts are included: one each of P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine.
- The X65 coarse belt is described as equivalent to P220; X22 medium corresponds to P1000, and X4 fine corresponds to P3000.
- P120, X65, X22, and X4 belts measure 3/4 by 12 inches.
- The 6000 extra-fine Micro-Mesh belt measures 1/2 by 12 inches.