This SmallRig Super Clamp review looks at a compact mounting option for camera setups that need to attach accessories to a nearby edge, bar, or support.
Its 15–40 mm jaw range and 1/4-inch and 3/8-inch threaded holes make it most relevant when a separate clamp point is more useful than another shoe or cage mount.
SmallRig Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact metal clamp for camera creators who need to attach compatible gear to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw spans from a minimum of 15 mm to about 40 mm.
- 1/4-inch threaded holes and a 3/8-inch threaded hole allow attachment of compatible accessories.
- Made from aluminum alloy and stainless steel.
- Updated rubber pads at the clamp contact points are intended to help prevent slipping and scratching.
Pros
- Creates a mounting point on compatible surfaces that may not have a camera shoe or threaded socket.
- The 15–40 mm jaw span accommodates a useful range of edges and bars.
Consider before buying
- The 15–40 mm jaw range rules out surfaces that are thinner or thicker than its stated limits.
- It is the clamp only, so buyers who need an articulating arm or a specific camera attachment will need compatible hardware separately.
Read the full review summary
The SmallRig Super Clamp is a straightforward way to create an accessory mounting point on compatible objects.
Its jaw opens from 15 mm to about 40 mm, and its threaded holes accept accessories such as a ball head or magic arm.
Aluminum alloy and stainless steel construction keep the design focused on a small, reusable piece of rigging hardware.
It suits photographers and video makers who already have a suitable surface or bar to clamp onto and want flexibility in where equipment sits.
The rubber pads are intended to help resist slipping and scratching, but the clamp's listed maximum weight recommendation is 3.3 pounds; buyers should treat that as a limit, check the load and leverage of their own setup, and secure equipment thoughtfully.
The buying factors
SmallRig Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp can attach to a range of compatible surfaces and provides both 1/4-inch and 3/8-inch threaded holes for accessories.
Jaw range
Its stated 15–40 mm range covers many small bars and edges, though it will not fit surfaces outside that span.
Accessory compatibility
Two common thread sizes give it useful pairing options for camera rig accessories.
Material choice
Aluminum alloy and stainless steel provide a metal construction suited to repeated rig adjustments.
Surface contact
Rubber pads are designed to reduce slipping and scratching, with actual grip depending on the surface and setup.
Load suitability
The 3.3-pound maximum weight recommendation is useful guidance, but does not establish how a particular extended or moving rig will behave.
Key Features and Specifications of SmallRig Clamp
- Adjustable jaw spans from a minimum of 15 mm to about 40 mm.
- 1/4-inch threaded holes and a 3/8-inch threaded hole allow attachment of compatible accessories.
- Made from aluminum alloy and stainless steel.
- Updated rubber pads at the clamp contact points are intended to help prevent slipping and scratching.
- Designed for mounting to objects such as hooks, shelves, plate glass, and cross bars, as well as other compatible supports.
- Listed maximum weight recommendation is 3.3 pounds; the package includes one super clamp.
Pros and Cons of SmallRig Clamp
Pros
- Creates a mounting point on compatible surfaces that may not have a camera shoe or threaded socket.
- The 15–40 mm jaw span accommodates a useful range of edges and bars.
- Both 1/4-inch and 3/8-inch threads support a variety of compatible rig accessories.
- Rubber contact pads are designed to help protect surfaces and resist slipping.
Consider before buying
- The 15–40 mm jaw range rules out surfaces that are thinner or thicker than its stated limits.
- It is the clamp only, so buyers who need an articulating arm or a specific camera attachment will need compatible hardware separately.
- The 3.3-pound maximum recommendation calls for care with heavier gear, especially when the load extends away from the clamp.
Who Should Buy SmallRig Clamp?
Good fit
Consider it if you need to place a camera accessory on a bar, shelf edge, or other compatible support and want to choose between 1/4-inch and 3/8-inch mounting points.
Its relatively compact single-clamp format makes sense when you already own the accessory hardware and mainly need a way to secure it somewhere useful.
Before buying, measure the surface where you intend to attach it and confirm that it falls within the 15–40 mm jaw range.
Then check the accessory's thread size, total load against the 3.3-pound recommendation, and how far the mounted gear will extend from the clamp.
Who should skip it
Skip this design if your mounting surface falls outside the 15–40 mm jaw range or your setup requires a supplied articulating arm, monitor holder, or other specific connection that this single clamp does not include.
Choose a different mounting approach if your equipment and rig geometry exceed the 3.3-pound recommendation or require a mount designed around a particular camera cage or shoe.
How the SmallRig Clamp fits a camera rig
Check the support before planning the shot
The clamp's main value is access to mounting locations that lack a standard camera attachment point.
Its 15–40 mm jaw range gives a concrete starting point: measure the intended bar or edge, and consider its shape and contact area as well as thickness.
A surface that fits the opening still needs to provide a stable place for the padded jaws to sit.
Thread options support flexible accessory choices
The 1/4-inch and 3/8-inch threaded holes let the clamp connect to a range of compatible accessories, including a ball head or magic arm.
That makes it a useful base for a modular rig, but the right connection depends on the accessory's thread and the direction in which it will hold the load.
Confirm those details before assembling a camera, light, or other gear.
Treat load and leverage as part of the setup
The listed maximum weight recommendation is 3.3 pounds. That figure is a useful ceiling for evaluating the equipment you plan to mount, while the distance between the clamp and the equipment also matters to a practical setup.
Keep the load modest, inspect the contact and tightening, and use additional support when the shooting environment or equipment calls for it.
Rubber pads add a layer of contact protection
The updated rubber pads are intended to help reduce slipping and scratching where the clamp meets the support.
This can be useful around surfaces that could mark, though grip depends on the material, condition, and shape of both the support and pads. Check the fit before relying on the mount for valuable gear.
Alternatives to SmallRig Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
Choose the reviewed clamp if you want a simple mounting base with two thread sizes and already have an accessory arm.
Consider this double ball head version if an included articulated connection and action-camera adapter better match your setup.
- This clamp mount includes a double ball head and an action camera adapter, and its description gives a maximum load of 1.5 kg.
- The reviewed clamp provides 1/4-inch and 3/8-inch threaded holes and a jaw range of 15–40 mm, but does not include an articulating arm in the package.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
The reviewed clamp is a better fit when you want a compact base and will supply your own accessory connection.
Choose the kit if you need the arm included and its wider 15–54 mm jaw range suits the support you plan to use.
- This kit combines a super clamp with a 9.8-inch articulating arm, double ball heads, and 1/4-inch screws at both ends; the clamp opens from 15 mm to 54 mm.
- The reviewed clamp has a 15–40 mm jaw range and threaded attachment points, with one clamp included.
Is SmallRig Clamp Worth It?
The SmallRig Super Clamp is worth considering when you need a simple, adaptable mounting base for camera accessories and have a support that fits its 15–40 mm jaw range.
Its dual thread sizes and padded metal construction make it flexible for modular setups.
Check the surface dimensions, accessory thread, load, and leverage before mounting gear.
The clamp is sold on its own, and its 3.3-pound maximum recommendation makes it a more natural choice for modest accessory setups than heavier or extended rigs.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact metal clamp for camera creators who need to attach compatible gear to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw spans from a minimum of 15 mm to about 40 mm.
- 1/4-inch threaded holes and a 3/8-inch threaded hole allow attachment of compatible accessories.
- Made from aluminum alloy and stainless steel.
- Updated rubber pads at the clamp contact points are intended to help prevent slipping and scratching.