The SmallRig Field Monitor Mount Holder review is most relevant to camera operators fitting a 5- or 7-inch monitor above a cage or handle.
Its cold shoe base, adjustable tilt and swivel, and anti-twist details suit rigs that need a compact, repositionable monitor support.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection on a cage or handle.
- Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for setting the monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- Bouncy locating pins on top are designed to further secure Ninja V and V+ monitors, while a silicone pad helps prevent scratching and twisting.
Pros
- Combines a cold shoe base with a 1/4-inch-20 mounting option.
- Offers broad tilt and swivel adjustment for framing the display.
Consider before buying
- The allowable load depends on the tilt angle, so the same payload may not suit every position.
- Swivel tension requires the included Allen wrench, and the knurled screw calls for retightening with that wrench.
Read the full review summary
This mount combines a cold shoe base with a top 1/4-inch screw, so it can connect a compatible monitor to a camera cage or handle and accommodate other small accessories.
Its 180-degree tilt and 360-degree swivel make it easier to choose a viewing angle, while the upgraded thumbscrew lets you adjust tilt tension without reaching for an Allen wrench.
It is a focused option for a compact camera rig, especially if you use a 5- or 7-inch monitor and value quick angle adjustments.
The small size and 76-gram weight help keep the mount unobtrusive, but the load limit changes with the tilt angle, and the 1/4-inch knurled screw should be retightened with the included Allen wrench for added security.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
The mount supports 180-degree tilt and 360-degree swivel, with tilt tension adjustable by hand.
Rig compatibility
A cold shoe base and a 1/4-inch threaded hole provide two connection options for compatible camera-rig setups.
Monitor fit
It is designed for 5- and 7-inch camera monitors, including locating pins intended to help secure Ninja V and V+ monitors.
Anti-twist details
Bouncy locating pins and a silicone pad are useful design touches for limiting movement and surface contact.
Load guidance
The description gives angle-specific load limits, so buyers can match a setup to the selected tilt position.
Portability
At 76 grams with a folded size of 78 × 67 × 42 mm, it is a compact addition to a camera rig.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for setting the monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- Bouncy locating pins on top are designed to further secure Ninja V and V+ monitors, while a silicone pad helps prevent scratching and twisting.
- The bottom cold shoe adapter connects to a compatible cage, and a bottom 1/4-inch-20 threaded hole allows connection to a magic arm or stabilizer.
- A top 1/4-inch-20 screw can support a compatible monitor, microphone, or light.
- Load limits vary by tilt: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees, and under 5 pounds at 30 degrees. The 1/4-inch knurled screw should be retightened with the Allen wrench for added security.
Pros and Cons of SmallRig Monitor Mount
Pros
- Combines a cold shoe base with a 1/4-inch-20 mounting option.
- Offers broad tilt and swivel adjustment for framing the display.
- Thumbscrew tilt adjustment makes angle tension accessible without a tool.
- Locating pins and a silicone pad address monitor movement and surface contact.
- Compact, lightweight construction suits a rig where space and added weight matter.
Consider before buying
- The allowable load depends on the tilt angle, so the same payload may not suit every position.
- Swivel tension requires the included Allen wrench, and the knurled screw calls for retightening with that wrench.
- Its intended monitor range is 5 and 7 inches; buyers with a different display should confirm the mounting interface and fit before choosing it.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider this mount if you use a 5- or 7-inch field monitor and want it directly above a cage or handle through a cold shoe.
The wide angle range helps adapt the screen position to different shooting arrangements, while the tilt thumbscrew makes quick adjustments more convenient during setup.
It also makes sense if your rig needs a compact holder with a 1/4-inch-20 connection available for a compatible magic arm or stabilizer.
Before buying, check your monitor’s mounting point, the cage or handle’s cold shoe, and the mount’s load limit at the tilt angle you expect to use.
Who should skip it
Look elsewhere if you need a longer articulated arm to position a screen farther from the camera; this holder is a compact mounting point rather than an extended arm.
Choose another support if your monitor and accessories exceed the applicable angle-specific load limit, or if you need a setup that does not require tool-assisted swivel adjustment and screw retightening.
How the SmallRig Monitor Mount Fits a Camera Rig
A compact path from cage to monitor
The cold shoe base is suited to a cage or handle with a compatible shoe, and the top 1/4-inch-20 screw provides the monitor attachment point.
This creates a direct, compact setup for keeping a small field monitor close to the camera; check both ends of your rig before purchase to confirm the connections match.
Angle range and tension control
With 180 degrees of tilt and 360 degrees of swivel, the mount gives operators room to orient a display for the shot. Tilt tension adjusts at the thumbscrew, while swivel tension is set with the included Allen wrench.
That split matters if you frequently change tilt during a shoot but prefer to establish swivel resistance during setup.
Load limits depend on position
The listed capacities decrease as the tilt angle moves from 90 degrees to 45 and 30 degrees.
Match the monitor and any attached load to the limit for the position you will use, and retighten the 1/4-inch knurled screw with the Allen wrench as directed.
The angle-specific figures make it important to assess the complete rig rather than relying on one maximum value.
Anti-twist features for compatible monitors
Locating pins and a silicone pad are intended to help secure Ninja V and V+ monitors and reduce scratching or twisting. These details may be particularly useful when the monitor can rotate or shift during repositioning.
Confirm that your display’s mounting arrangement works with the pins and top screw before relying on this fit.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Camera Monitor Mount 6313
Consider the 6313 if portrait or landscape mounting and a retractable locating screw are priorities.
The Field Monitor Mount Holder remains a straightforward fit if its stated 5- and 7-inch monitor design and connection options meet your rig needs.
- The 6313 also offers 180-degree tilt and 360-degree pan, with a cold shoe base and bottom 1/4-inch-20 hole.
- Its description adds a retractable locating screw, horizontal and vertical monitor installation, and tilt damping adjustable by thumb knob.
- The Field Monitor Mount Holder provides a cold shoe base, a bottom 1/4-inch-20 threaded hole, and locating pins for Ninja V and V+ monitors.
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 5.5-Inch Articulating Magic Arm
Choose the articulating arm if you need to extend the monitor away from its mounting point and want ball-head positioning.
Choose the Field Monitor Mount Holder for a more compact cold shoe connection and its stated monitor-focused anti-twist details.
- This 5.5-inch arm uses 1/4-inch screws at both ends and double 360-degree ball heads for positioning a monitor or light; it is described as having a best load of 1.5 kilograms.
- The Field Monitor Mount Holder is a compact direct mount with a cold shoe base and a tilt range of up to 180 degrees.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig built around a 5- or 7-inch monitor.
Its cold shoe and 1/4-inch-20 connections, broad angle adjustment, and tool-free tilt tension changes make it a versatile holder for compatible setups.
Check your monitor fit and the load limit for your chosen tilt angle before buying.
The included Allen wrench remains part of setup for swivel tension and screw retightening, so this mount is best for buyers comfortable checking those connections as they configure the rig.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection on a cage or handle.
- Designed to support 5- and 7-inch camera monitors through a cold shoe connection on top of a camera cage or handle.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for setting the monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the included Allen wrench.
- Bouncy locating pins on top are designed to further secure Ninja V and V+ monitors, while a silicone pad helps prevent scratching and twisting.