The SmallRig Ballhead Clamp Double Ball Adapter review is for camera creators who need to attach a monitor, light, or other compact accessory to a rod, tube, shoe mount, or similarly useful support.
Its combination of a clamp, 1/4-inch screw, and articulated ball head makes it a flexible small rigging option, provided your mounting point and accessory fit its stated limits.
SmallRig Ballhead Clamp Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164
A compact mounting adapter for camera creators who need to position a monitor, light, or small accessory on a compatible clamp point.
- Clamp jaws open to 40 mm for attachment to compatible rods, tubes, and other supports.
- A 1/4-inch screw at the top connects to compatible monitors, video lights, and accessories.
- Double ball-head articulation allows the mounted accessory to be repositioned through 360 degrees.
- A single locking knob is designed to secure the ball-head adjustment.
Pros
- Combines the clamp and adjustable head in one compact mounting piece.
- Uses a common 1/4-inch screw for compatible camera accessories.
Consider before buying
- The 40 mm maximum opening rules out thicker mounting points.
- Its compact form does not provide the reach of a longer articulating arm.
Read the full review summary
This adapter brings a clamp and an adjustable ball-head mount together, so it can hold an accessory without requiring a separate clamp and arm assembly.
The clamp opens to 40 mm, includes a protective rubber pad, and is described for mounting to rods or tubes as well as camera equipment.
At the opposite end, a 1/4-inch screw provides a familiar connection for compatible monitors, lights, and other accessories.
It is best suited to lightweight camera rigs where angle changes and flexible attachment points matter more than a long reach.
The product data gives conflicting load figures, so buyers should check the current packaging or manufacturer guidance for the precise supported load before attaching valuable equipment.
Consider the dimensions and clearance of your rig, too: this is a compact adapter rather than a long extension arm.
The buying factors
SmallRig Ballhead Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The clamp and 1/4-inch screw support several practical camera-rig attachment arrangements.
Angle adjustment
The double ball-head design is described as offering 360-degree articulation for repositioning.
Clamp range
A 40 mm opening accommodates a useful range of rods and tubes, though larger supports will not fit.
Accessory compatibility
The 1/4-inch screw is intended for monitors, lights, and other compatible small devices.
Build and contact protection
Aluminum alloy construction and a dense rubber pad are useful design choices for a compact clamp.
Load guidance clarity
The supplied product details give different maximum-load figures, so the correct limit needs confirmation.
Key Features and Specifications of SmallRig Ballhead Clamp
- Clamp jaws open to 40 mm for attachment to compatible rods, tubes, and other supports.
- A 1/4-inch screw at the top connects to compatible monitors, video lights, and accessories.
- Double ball-head articulation allows the mounted accessory to be repositioned through 360 degrees.
- A single locking knob is designed to secure the ball-head adjustment.
- The clamp area has a dense rubber pad intended to help protect the contact surface from scratches.
- The adapter is made primarily from aluminum alloy, weighs 163 g, and has a folded size of 68.5 × 43 × 10 mm.
Pros and Cons of SmallRig Ballhead Clamp
Pros
- Combines the clamp and adjustable head in one compact mounting piece.
- Uses a common 1/4-inch screw for compatible camera accessories.
- The 40 mm clamp opening can attach to a variety of suitably sized supports.
- Rubber padding helps protect the surface where the clamp grips.
Consider before buying
- The 40 mm maximum opening rules out thicker mounting points.
- Its compact form does not provide the reach of a longer articulating arm.
- The supplied details conflict on the maximum supported load, so buyers should confirm the applicable limit before use.
Who Should Buy SmallRig Ballhead Clamp?
Good fit
Consider this SmallRig Ballhead Clamp if you are building a compact camera setup and need to place a lightweight monitor or light at an adjustable angle.
The clamp can attach to a compatible rod or tube, while the top 1/4-inch screw gives you a direct connection for accessories with a matching threaded socket.
It also makes sense when you want fewer separate rigging parts. Check that the support falls within the 40 mm jaw opening and that the accessory’s mounting point, weight, and required clearance suit your setup.
Confirm the load limit from current product guidance before mounting valuable equipment.
Who should skip it
Choose another mounting approach if you need an extended arm to position equipment well away from the support point. This adapter is compact, so its reach is limited by its short form.
It is also a poor fit for supports wider than 40 mm or for setups where you need a clearly confirmed load rating before purchase. Verify that limit before relying on the adapter with your particular accessory.
How the SmallRig Ballhead Clamp Fits a Compact Camera Rig
A clamp and ball head in one piece
The useful design choice here is the combination of a support clamp and an articulated accessory mount.
It can reduce the number of separate parts needed to place a light or monitor on a suitable bar or tube, while the 1/4-inch screw keeps the device end straightforward for compatible gear.
Think about the support point first
The 40 mm jaw opening sets a clear boundary for placement.
Measure the rod or tube you plan to use, and consider how much space surrounds it; a clamp can fit by diameter yet still be awkward if nearby handles, cables, or controls obstruct its knob or the mounted accessory.
Positioning is flexible, reach is compact
The 360-degree ball-head articulation is useful when you need to angle an accessory after attaching the clamp. Because the adapter is compact, it is aimed at close mounting rather than extending a device outward.
If your framing requires more distance from the support, a longer arm is the more suitable form factor.
Confirm the load for your setup
The product details give inconsistent maximum-load figures, so a buyer should verify the current applicable rating before mounting equipment.
In practice, consider the weight of the accessory and how far it sits from the clamp, then ensure the locking knob is accessible and can be secured as intended.
Alternatives to SmallRig Ballhead Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount 1138
Consider the 1138 if you want a similar clamp-and-articulating-mount setup with a supplied action-camera adapter and a clearly stated 1.5 kg capacity.
The reviewed adapter may appeal if its compact 40 mm clamp and direct top screw better match your rig; check current load guidance for it before choosing.
- The 1138 combines a super clamp with a double ball-head mount, includes an action-camera adapter, and lists support up to 1.5 kg.
- The Ballhead Clamp combines a 40 mm support clamp with a compact 1/4-inch ball-head adapter.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit 2732
Choose the 2732 if you need more reach and a wider stated clamp range for positioning accessories.
The Ballhead Clamp is a more compact option when a short connection is sufficient and the support fits within its 40 mm opening.
- The 2732 pairs a super clamp that opens from 15 mm to 54 mm with a 9.8-inch articulating arm and 1/4-inch screws at both ends.
- The Ballhead Clamp is a compact adapter with a clamp opening up to 40 mm and an adjustable ball head.
Is SmallRig Ballhead Clamp Worth It?
The SmallRig Ballhead Clamp Double Ball Adapter is worth considering for compact camera setups that need an adjustable mount for a compatible monitor, light, or small accessory.
Its clamp, 1/4-inch screw, rubber contact pad, and articulated head make a versatile combination for close mounting.
Before buying, confirm your support is no wider than 40 mm and verify the current load rating for the exact setup. If you need more reach or a rating you can confirm directly, compare a longer clamp-and-arm design.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164
A compact mounting adapter for camera creators who need to position a monitor, light, or small accessory on a compatible clamp point.
- Clamp jaws open to 40 mm for attachment to compatible rods, tubes, and other supports.
- A 1/4-inch screw at the top connects to compatible monitors, video lights, and accessories.
- Double ball-head articulation allows the mounted accessory to be repositioned through 360 degrees.
- A single locking knob is designed to secure the ball-head adjustment.