Product Reviews

SmallRig 2066B Adjustable Articulating Magic Arm Review

A flexible 9.8-inch positioning arm for camera-rig users who need to place a lightweight monitor, light, or microphone at a custom angle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Adjustable Articulating Magic Arm review centers on a compact rig accessory for positioning a monitor, light, or microphone where a fixed mount would be limiting.

Its 9.8-inch length, dual ball heads, and 1/4-inch screws suit creators building around compatible threaded mounting points.

SmallRig Magic Arm Review Summary

The quick verdict

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible 9.8-inch positioning arm for camera-rig users who need to place a lightweight monitor, light, or microphone at a custom angle.

  • 9.8-inch adjustable articulating arm for positioning compatible camera accessories.
  • Dual 360-degree ball heads allow angle changes at both ends.
  • 1/4-inch threaded screw on each end for compatible accessories and rig mounting points.
  • Rubber O-ring cushion at the screw helps protect monitor contact and tighten the connection.

Pros

  • Two articulating ball heads allow flexible positioning of the mounted accessory.
  • The 9.8-inch length offers reach for moving a light or monitor away from the camera body.

Consider before buying

  • The 213 g maximum recommendation rules it out for many heavier monitor and light setups.
  • The arm has no included clamp, so buyers need compatible threaded attachment points or separate mounting hardware.
Read the full review summary

The 2066B uses two 360-degree ball heads to give each end room to pivot, which can help position a small accessory around a camera cage or other compatible support.

Both ends use 1/4-inch threads, and a rubber O-ring at the screw is intended to cushion the monitor contact and help it lock more tightly.

At 0.21 kg, the arm is a dedicated piece of rig hardware rather than a complete support system: it does not include a clamp or monitor holder.

Its maximum recommended weight is 213 g, so it is best considered for light accessories after checking the combined load and how the arm will attach to the rest of the rig.

The buying factors

SmallRig Magic Arm Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Angle flexibility

Dual 360-degree ball heads provide broad adjustment at both ends for framing an accessory.

7/10

Mount compatibility

The 1/4-inch threads on both ends fit a range of compatible camera-rig accessories, though the mounting points must match.

7/10

Reach

A 9.8-inch arm offers useful extension for repositioning gear, with the tradeoff of a longer arm to accommodate on the rig.

7/10

Accessory protection

A rubber O-ring at the 1/4-inch screw is designed to help cushion a monitor and improve its hold.

5/10

Load fit

The 213 g maximum weight recommendation makes this a narrowly suited option for lightweight accessories.

7/10

Rig simplicity

A single arm with threaded ends is straightforward when the rig already has compatible attachment points.

Key Features and Specifications of SmallRig Magic Arm

  • 9.8-inch adjustable articulating arm for positioning compatible camera accessories.
  • Dual 360-degree ball heads allow angle changes at both ends.
  • 1/4-inch threaded screw on each end for compatible accessories and rig mounting points.
  • Rubber O-ring cushion at the screw helps protect monitor contact and tighten the connection.
  • Designed for use with items such as on-camera flash lights, microphones, LCD or DV monitors, cages, NATO rails, and side handles.
  • Maximum recommended supported weight: 213 g; listed item weight: 0.21 kg.

Pros and Cons of SmallRig Magic Arm

Pros

  • Two articulating ball heads allow flexible positioning of the mounted accessory.
  • The 9.8-inch length offers reach for moving a light or monitor away from the camera body.
  • Standard 1/4-inch threads at both ends support a range of compatible rig components.
  • Rubber cushioning at the screw can help limit direct contact with a monitor.

Consider before buying

  • The 213 g maximum recommendation rules it out for many heavier monitor and light setups.
  • The arm has no included clamp, so buyers need compatible threaded attachment points or separate mounting hardware.
  • Its length can create a longer, more projecting setup; check clearance and balance before fitting it to a compact rig.

Who Should Buy SmallRig Magic Arm?

Good fit

Consider the SmallRig 2066B if you already have compatible 1/4-inch mounting points and want to position a light accessory at a custom angle.

The dual ball heads allow adjustment on both ends, while the 9.8-inch reach may help clear nearby rig components or bring a monitor into a more convenient viewing position.

It is most appropriate for setups that stay comfortably within the 213 g maximum recommendation.

Before mounting, weigh the accessory and any attached hardware together, confirm the threads match, and check that the planned reach will not interfere with camera controls or other equipment.

Who should skip it

Choose another mounting approach if your accessory and attached hardware exceed the 213 g recommendation, or if your setup needs a clamp because it has no compatible 1/4-inch threaded point.

This arm is also a poor fit when you need a short, low-profile connection and have no use for its 9.8-inch reach.

How the SmallRig Magic Arm Fits a Camera Rig

Reach and positioning

The 9.8-inch length and ball heads at both ends give the arm room to place an accessory away from its mounting point and angle it independently.

That flexibility can be useful when a fixed connection leaves a monitor or light poorly positioned, but the longer reach also makes it sensible to check the complete rig for clearance and balance.

Threaded connections

A 1/4-inch screw at each end makes the arm useful when both the accessory and support offer matching threaded connections.

The design description names cages, NATO rails, and side handles among compatible rig components, but buyers should confirm the specific attachment arrangement before purchase because the arm itself is not a clamp.

Weight and contact

The maximum recommended weight is 213 g, a key limit for choosing what to mount.

The rubber O-ring at the screw is designed to cushion the monitor contact and help the connection lock more tightly; it does not change the stated weight recommendation, so account for the accessory and anything attached to it.

Alternatives to SmallRig Magic Arm

Camera Mounts & Clamps alternative

SmallRig 5.5-Inch Adjustable Articulating Magic Arm
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 5.5-Inch Adjustable Articulating Magic Arm

Consider the shorter arm if a more compact reach suits your rig and its stated best-load figure fits your intended setup.

The 2066B may suit buyers who specifically need its longer 9.8-inch extension, while keeping within its lower 213 g recommendation.

  • This 5.5-inch arm also has dual 360-degree ball heads and 1/4-inch screws at both ends, and its description gives a best load of 1.5 kg.
  • The 2066B is 9.8 inches long and has a maximum recommended weight of 213 g, with a 1/4-inch screw at each end.

Camera Mounts & Clamps alternative

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit

Choose the clamp kit if you need to attach the arm to a rod or other clamped surface and its jaw range suits that support.

The 2066B is the simpler choice when you already have threaded mounting points and want just the arm.

  • The 2732 combines a 9.8-inch arm with a super clamp that opens from 15 mm to 54 mm; its arm has 1/4-inch screws at both ends, and the clamp has 1/4-inch and 3/8-inch threads.
  • The 2066B is a standalone 9.8-inch articulating arm with 1/4-inch screws on both ends and a 213 g maximum weight recommendation.

Is SmallRig Magic Arm Worth It?

The SmallRig 2066B is worth considering when a camera rig needs a flexible 9.8-inch arm for a lightweight accessory and already provides matching 1/4-inch mounting points.

Its dual ball heads and cushioned screw contact are useful design details for positioning a monitor, light, or microphone.

Check the 213 g maximum recommendation, accessory weight, mounting threads, and available clearance before choosing it. If the setup needs a clamp or more reach than its placement allows, select a mount designed for that arrangement instead.

Your review at a glance

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible 9.8-inch positioning arm for camera-rig users who need to place a lightweight monitor, light, or microphone at a custom angle.

  • 9.8-inch adjustable articulating arm for positioning compatible camera accessories.
  • Dual 360-degree ball heads allow angle changes at both ends.
  • 1/4-inch threaded screw on each end for compatible accessories and rig mounting points.
  • Rubber O-ring cushion at the screw helps protect monitor contact and tighten the connection.

Written by

hpautowerks.com Editorial Team

Editorial team

hpautowerks.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2066B Adjustable Articulating Magic Arm

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible 9.8-inch positioning arm for camera-rig users who need to place a lightweight monitor, light, or microphone at a custom angle.

  • 9.8-inch adjustable articulating arm for positioning compatible camera accessories.
  • Dual 360-degree ball heads allow angle changes at both ends.
Check Video Reviews on Amazon